Ultrasonic thickness gauge ADL UT20

Description

Ultrasonic thickness gauge ADL-UT20 can work with any separately combined transducers as well as high-temperature transducers operating at frequencies from 2.5 MHz to 10 MHz, and their use provides high reliability of results in laboratory, workshop and field conditions.

This device is implemented on a modern electronic base, equipped with a bright color screen and built-in memory for storing settings and the characteristics of results.

This model has a simple and intuitive interface.

Lightweight shockproof case provides dust and moisture protection to IP-54 in various operating conditions and resistance to drops from heights up to 2 meters.

This ultrasonic thickness gauge is ideal for use in the rapid measurement of metal and non-metal products such as: sheets, tanks, pipes, pipelines, bridges, ships’ hulls and other structures, both during and outside periods of operation, to determine the extent of any corrosion present etc..

Widely applicable to energy, metallurgical, machine building, shipbuilding, transport and other industrial industries.

FEATURES OF ULTRASONIC THICKNESS GAUGE ADL-UT20:

• high sensitivity;
• convenient;
• intuitively simple interface;
• the possibility of manual and automatic sensitivity adjustment;
• measuring ranges from 0.8 to 300 mm;
• the possibility of connecting any standard, separately-combined transducers;
• connection of high-temperature converters up to 350° С;
• convenient calibration by thickness or by speed and the saving of calibrations in the device memory;
• option of recording results and transferring to a computer;
• bright color screen;
• large memory permits recording more than 5000 measurements;
• built-in Li-on battery provides up to 8-9 hours of operation.
• dust and moisture protection to IP 54.

The gauge provides information about the battery level, as well as an additional notification of the maximum discharge of the battery. When turned off, the device remembers the settings for the transducer (correction of the zero setting, gain, set ultrasonic speed in the material and levels). This device also allows the setting up of transducers by establishing their metrological characteristics and saving them in the device.

One of the advantages of the device is the work with specialized high-temperature sensors, which allow one-sided measurement of products with a surface temperature of up to 350°C.

Metal pipes or tanks can be measured without taking them out of service and metal bars and cast products can be measured while still cooling.