Ultrasonic thickness gauge ADL UT25

Description

UT 25 is designed to measure the thickness of metal alloys and isotropic non-metallic materials where access is limited to one side.

Works with any separately combined transducers operating at frequencies from 2.5 MHz to 10 MHz, providing high reliability in laboratory, shop and field conditions.

Built on a modern electronic platform and equipped with a bright colour screen and a memory for storing settings, characteristics and results.  It has a simple, intuitive interface.

One of the advantages of the device is operation with specialised sensors, for surface temperatures of up to 350°C.   Metal pipes, tanks etc can be measured without taking them out of operation and cast products can be measured before they are fully cooled.

Calibration takes just ten seconds.  The instrument can be calibrated against a reference sample or against a known thickness on any material.

Lightweight and comfortable shockproof case provides dust and moisture protection as well as resistance to falls of up to 2 meters.

Features of ultrasonic thickness gauge UT 25:

• Wide functionality, which includes modes: A-scan, B-scan;
• Thickness digital value mode:
• The limit mode signals when the thickness values go beyond the set limits
• Differential measurement mode shows the difference between the set value and the measured thickness.
• High sensitivity;
• Ease of use;
• Intuitive interface;
• Measurement methods: Echo-Echo-Echo and Pulse – Echo;
• Sensitivity adjustment;
• Works with high-temperature sensors up to 350°С
• Measurement ranges from 0.6mm to 500mm;
• Gain adjustment
• Flexible sensor settings
• Bright colour screen;
• Ability to save results and transfer to a computer;
• Large memory;
• Built-in Li-Pol battery provides up to 8 hours of operation;
• Presets for various materials
• Light and compact
• Rubberised dust and moisture-proof housing
• Lemo-Lemo connectors that comply with all international standards.
• Acoustic contact indication.
• Automatic shutdown