Superficial Rockwell Hardness Tester with optional Bench stand.
These portable Rockwell hardness testers can be used on thin, small, long and irregular shaped parts as well as on inner and outer surfaces of steel pipes etc.
They are particularly suitable for parts with small bearing faces (e.g. small stampings etc).
There are a variety of anvils available allowing the user to test arrange of small and irregularly shaped items.
|Initial test force:||3 Kgf|
|Total test force:||15 Kgf, 30 Kgf, 45 Kgf (for PHR1-ST 15 Kgf only)|
|Test head:||120°Diamond Indenter|
|1/16″ carbide alloy ball|
|Throat:||PHR-1S||25mm x 25mm|
|PHR-2S||50mm x 50mm|
|PHR1-ST||Dia > 4.8|
|Indication Error:||Complies with ISO 6508, ASTM E18 and ASTM E110|
|Repeatability Error:||Complies with ISO 6508, ASTM E18 and ASTM E110|
|Test Resolution:||0.5 HR|
|Test range:||HRN, HRT, HRW, HRX, HRY, etc. 15 scales.|
|Application range:||Common materials including iron and steel, copper, aluminium, zinc, lead, tin, carburized layer, nitrided steel, etc.|
120°Diamond Indenter (not UKAS certified)
1/16”carbide alloy ball (not UKAS certified)
1 HR15T test block (not UKAS certified)
Flat adapter (PHR-1ST)
120°Diamond indenter (UKAS certified)
Carbide ball indenter (1/16″, 1/8″) (UKAS certified)
Steel ball indenter (1/4″, 1/2″)
Standard test blocks (UKAS certified)
Raised spot anvil
Slim raised spot anvil (for small supporting surface workpieces)
Diamond raised spot anvil
Convex cylindrical anvil (for tubes and curved sheets)
Anvil for testing steel balls